The steps below outline how to add a user's access to unlock the Vaultek safe with a PIN code or fingerprint directly on the device.
- Navigate to Lockers in the left menu bar and select Accounts & Devices
- Click the View Users drop down on the right side and select Add User
- Adding PIN Code Access
- Select the desired Signature from the drop down list and enter the VetSnap PIN code
- Enter a PIN code that is 5-9 digits long (Note: the PIN code cannot contain the number 0 or 9, as there is not a button on the device for these digits). If you do not create your own PIN code, one will be generated for you.
- Adding Fingerprint Access
- Select Enable Fingerprint Access
- Choose which finger you want to scan (Note: users may have up to 2 fingerprints saved to the device)
- The device will give you 30 seconds to do 5 scans of your fingerprint. It is recommended to move your finger slightly between each scan to provide a better scan of your entire fingerprint.
Privileged and confidential. For VetSnap approved use only. Copyright © VetSnap Corporation. All rights reserved. Not to be distributed, reproduced, modified, or used to create derivative works without explicit written permission from VetSnap Corporation. VetSnap is not a DEA consultant and does not provide legal or regulatory advice regarding controlled substances.